How To Set The Measurement Units - MV Agusta BRUTALE 990R Manual Del Usuario

4.4.3. How to set the measurement units

The following measurement units may be changed at
the same time:
• Speed
• Distance covered
• Tyre temperature/Pressure (Some models only)
WARNING
4
The display modes may be changed or set
when the engine is on, the gear must be in
neutral, the motorbike must be stationary with
your feet on the ground. Do not change the
display while driving.
Access "RUN" and press "SET" repeatedly until
"UNIT CHANGE" appears.
Press "OK" for over four seconds; the measurement
unit of the speedometer starts blinking.
OPERATION
- 46 -
4