Selecting The Abs Functions - MV Agusta Brutale Serie Manual De Uso

4.4.7. Selecting the ABS functions *

Press "SET" in order to access to "ABS" mode;
"SETTING ABS" appears on the display.
WARNING
The display modes may be changed or set
when the engine is off, the gear in neutral, the
motorbike stationary with your feet on the
ground. Do not change the display while dri-
ving.
Press "OK" for less than four seconds: "ABS ON"
starts blinking on the display.
If you do not press any button, after three seconds
the "ABS ON" selection is confirmed; under this condi-
tion, the ABS system is activated. Press "SET" to exit
the "ABS" mode.
(*): This function is present only on certain models
OPERATION
- 61 -
4
4