Signature Kitchen Suite SKSDR360GS El Manual Del Propietario página 19

Preparing for Installation
Tools needed
Phillips screwdriver
Level
Pipe wrench (2)
(one for support)
Parts Provided
Template (1)
Anchor sleeves (6)
Parts not Provided
4-wire or 3-wire cord and
strain relief kit
(UL approved 40 or 50 AMP)
Materials You May need
• Gas line shut-off valve
• Pipe joint sealant that resists action of natural and LP gases
• Flexible metal appliance connector (
Never use an old connector when installing a new range.
• Flare union adapter for connection to gas supply line (
• Flare union adapter for connection to pressure regulator on range (
• Liquid leak detector or soapy water
• Lag bolt or / " O.D. sleeve anchor (for concrete floors only)
1
2
Flat-blade screwdriver
Open-end or
adjustable wrench
Tape measure
Anti-tip bracket kit (1)
Lag bolts (6)
Strain relief
(For conduit
Installations only)
/ " or / " NPT x
3 1
4 2
1 / " Nut driver Pliers
4
Drill Safety glasses
Gloves
Leg cover (2 sets)
/ " I.D.)
1
2
/ " or / " NPT x / " I.D.)
3 1 1
4 2 2
/ " NPT x
1
2
INSTALLATION
Dolly
Front rail (1)
Screws (8)
(Leg cover, Front rail)
/ " I.D.)
1
2
19