Replacing Oven Lamp - Franke Spar GN 82 M NT XS ARG Manual Del Usuario

Rack Positions:
Rack 4
Rack 3
Rack 2
Rack 1

REPLACING OVEN LAMP

WARNING: To avoid electric shock, ensure that the appliance circuit is
open before changing the lamp. (having circuit open means power is off)
First disconnect the power of appliance and ensure that appliance is cold.
Remove the glass protection by turning as indicated in the figure on the
left side. If you have difficulty in turning, then using plastic gloves will
help you in turning.
Then remove the lamp by turning, install the new lamp with same speci-
fications. Reinstall glass protection, plug the power cable of appliance into
electrical socket and complete replacement. Now you can use your oven.
Lamp assembly (Type G9):
It is important to place it right in the wire
rack. Do not let the wire rack lean against
the back wall of the oven. The shelf posi-
tions are shown on the side.
Figure 11
220-240 V, AC
15-25 W
Figure 12
GB
Lamp assembly (Type E14):
19
220-240 V, AC
15 W
Figure 13