Wiring Options - HAMPTON BAY HB-4305-BK Guía Para El Uso Y Cuidado

Wiring Options

Determing maximum wattage
1
when adding light fixtures
NOTE: All wiring should be run in accordance with
the National Electrical Code through conduit or another
acceptable means. Contact a qualified electrician if there is
any question as to the suitability of the system.
When controlling an additional light fixture(s), the
maximum wattage of the motion sensor (C) on this light
fixture (B) should be observed. See the illustration to the
right for an example of a maximum lamp wattage load
calculation.
IMPORTANT: When determining the maximum lamp wattage
rating of the light fixture to be controlled, refer to the maximum lamp
wattage label on the fixture and not the wattage rating on the lamp(s)
currently installed in the fixture.
Controlling a standard light
2
fixture(s)
IMPORTANT: Total fixture ratings must not exceed 500 Watts (4.2 A).
When wiring to control a standard light fixture:
Strip the red wire on the light fixture (B) and
connect it to the standard light's black wire.
Connect all white wires together.
Connect all ground wires together.
Controlling a motion sensing
3
light fixture(s)
IMPORTANT: Total fixture ratings must not exceed 500 Watts (4.2 A).
When wiring to control another motion sensing light
fixture (Master / Slave):
Strip the red wire in both light fixtures.
Connect the red wire of the controlling
(master) fixture (B) to the red and black wires
of the controlled (slave) fixture.
Connect all white wires together.
Connect all ground wires together.
Maximum Load for
Motion Sensor –
500 Watts
White to white
Black to
Motion
black
Sensing
Light
Ground to ground
Wiring the motion sensing light
to control a standard light
White to white
Black to
Master
black
Light
Ground to ground
Wiring the motion sensing light
to control another motion sensing light
7
Please contact 1-855-HD-HAMPTON for further assistance.
Maximum Lamp
Wattage Rating
for Light Fixture –
CONTROLLING Fixture
Maximum Lamp
Wattage Rating
for Light Fixture –
CONTROLLED Fixture 1
Maximum Lamp
Wattage Rating
for Light Fixture –
CONTROLLED Fixture 2
TOTAL Load for
Motion Sensor –
300 Watts (200 Watts Remaining)
Standard
Red to
black
Red
to black
Black to red and black
HAMPTONBAY.COM
100 Watts
100 Watts
100 Watts
Light
Slave
Light