Operation (continued)
Adjusting the SENSITIVITY
3
switch
To increase the detection zone, slide the
"SENSITIVITY" switch toward the "HI" position.
To decrease the detection zone, slide the
"SENSITIVITY" switch toward the "LO" position.
NOTE: The motion sensor (C) is more sensitive to
motion moving across the front of the sensor. The motion
sensor (C) is less sensitive to motion moving directly
toward the front of the sensor.
NOTE: The higher the "SENSITIVITY" setting, the greater
the possibility of false triggering. To reduce false triggering,
slide the "SENSITIVITY" switch toward the "LO" setting.
IT Y
IT IV
N S
S E
I
- H
- M
L O
M IN
1 0
5
E
1
S T
- T IM
T E
O N
C
Adjusting the motion sensor
5
coverage area
The motion sensor (C) detects "motion" by the
movement of heat (body heat) across the coverage
area. If you suspect a heat source other than body
heat is falsely triggering the motion sensor (C) and
reducing the sensitivity does not solve the problem,
then a lens shield (DD) can be installed.
The plastic lens shield (DD) is divided into 6 sections. Each
section will reduce the coverage angle by 30 degrees. Also,
the tip of each section may be removed to change the
effective range of the motion sensor (C).
Break off the amount of the lens shield (DD)
needed to block the desired area of coverage.
Cut the desired amount of double-sided tape
(EE) needed for the lens shield (DD).
Remove the paper backing from one side of
the cut double-sided tape (EE) and adhere it to
the inside of lens shield (DD).
Remove the paper backing from other side of the
cut double-sided tape (EE) and adhere the lens
shield (DD) to the sensor (C) lens.
Retest to confirm the sensor (C) is no longer
false triggering.
SENSITIVITY
LO - M - HI
TEST 1 5 10 MIN
ON-TIME
4
Adjusting the ON-TIME switch
NOTE: The "ON-TIME" switch determines the amount of
time the light will stay on full bright after all motion has
stopped.
Set the "ON-TIME" switch to the 1, 5, or 10
minute position.
IT Y
IT IV
N S
S E
I
- H
- M
L O
M IN
1 0
5
E
1
- T IM
S T
T E
O N
C
DD
Effective
Coverage Area
(Top View)
DD
Portion
Removed
DD
9
Please contact 1-855-HD-HAMPTON for further assistance.
SENSITIVITY
LO - M - HI
TEST 1 5 10 MIN
ON-TIME
C
C
Y
V I T
I T I
N S
S E
I
- H
- M
L O
N
M I
1 0
5
M E
1
- T I
S T
T E
O N
HAMPTONBAY.COM
Area
Blocked
Area
Blocked
C