Kohler K-9616 Guía De Instalación Y Cuidado página 4

Antes de comenzar (cont.)
Kohler Co. se reserva el derecho de modificar el diseño de los productos sin
previo aviso, tal como se especifica en la lista de precios.
Installation
K-9616, K-9620
Anchor Nuts
Washer
Écrous d'ancrage
Rondelle
Arandela Tuercas de anclaje
Gasket
Joint
Bolt
Empaque
Boulon
Perno
Grip Rail
Rail d'appui
Agarradera
All Models/Tous modèles/Todos los modelos
Back Side of Bath
Arrière de la Baignoire
Lado posterior de la Bañera
For Models K-9616 and K-9620:
Place a washer and gasket over each bolt.
Thread each bolt half way into the pre-installed anchor nuts in the bath.
With the edge of the grip rail between the washer and the gasket, slide the slots of
the grip rail on the bolts.
For Models K-9621 and K-9623:
Place a washer over each bolt.
Thread each bolt through the hand grip rail and gasket, then into the pre-installed
anchor nuts in the bath.
For All Models:
Align the gaskets with the contour of the edge of the grip rail, then tighten the
bolts evenly and securely with a 1/4" open end wrench.
Using a razor blade, carefully trim any excess material from the gasket.
Repeat the above procedure for the remaining grip rail.
1110210-2-A
K-9621, K-9623
Washer
Rondelle
Arandela
Bolt
Boulon
Gasket
Perno
Joint
Empaque
Seal here./Sceller ici./Selle aquí.
Seal here./Sceller ici./Selle aquí.
4
Gasket
Joint
Empaque
Grip Rail
Rail d'appui
Agarradera
Kohler Co.