Before Returning For Repairs; Specifications - DSR INDUSTRIAL Serie Manual Del Usuario

PROBLEM
The measured current is
much lower than what was
selected.
14.

BEFORE RETURNING FOR REPAIRS

14.1 When a charging problem arises, make certain that the battery is capable
of accepting a normal charge. Use a good battery to double check all
connections and the AC outlet for a full 120-volts.
14.2 When an UNKNOWN OPERATING PROBLEM arises, please read the
complete manual and call the customer service number for information
that will usually eliminate the need for return.
If the above solutions do not eliminate the problem or for information about troubleshooting
or replacement parts, call toll-free from anywhere in the U.S.A.
15.

SPECIFICATIONS

Nominal Operating Voltage (VAC)
Input Voltage Range (VAC)
Input Current (A max)
Output Power (W)
Output Current (A max)
Output Voltage (VDC max. / maintain)
Case
Dimensions (inches)
Weight
AC Power Input Cable
DC Power Output Adapters
POSSIBLE CAUSE
The charger reached the
maximum voltage and is
reducing the current.
1-800-621-5485
7:00 am to 5:00 pm Central Time Monday thru Friday
14 Gauge 9' with NEMA 5.15 Plug
8 Gauge 6' with Polarized 50 Amp Quick
Connect Connector
Electrical
Mechanical
Steel with Baked Enamel Finish
Connections
10
• •
REASON/SOLUTION
No problem, this is a normal
condition.
120 ± 10%
61.6 / 52.8
11 L x 9½ W x 10 ¼ H
120
15 A
1200
25
40 lbs