Festina IFM0S90 Manual De Instrucciones página 10

USING THE CHRONOGRAPH
[STANDARD MEASUREMENT]
Chronograph minutes and
seconds are read here
When the measured time is less than
START STOP
"A" "A"
When the measured time is
over 61 seconds
[ACCUMULATED ELAPSED TIME MEASUREMENT]
When the measured time is less
than 61 seconds
START STOP
"A" "A"
chronograph 1/100
When the measured time
is over 61 seconds
Can be operated repeatedly
Chronograph minutes and
seconds are read here
I F M 0 S 9 0
61 seconds
*Read in RESET
chronograph 1/100
seconds
"A" "B"
STOP
*Read in
RESTART
"A"
seconds
"A"
"A"
16
I F M 0 S 9 0
CHRONOGRAPH RESET (incl. after replacing battery)
This procedure should be performed when the chronograph 1/100 second hand and
the chronograph second hand do not return to zero position after the chronograph
has been reset, and including after the battery has been replaced.
1. Pull the crown out to the 2nd position.
2. Press button "A" to set the chronograph 1/100 second hand to zero position.
3. Press button "B" to set the chronograph second hand at 6 o'clock to zero position.
The chronograph hands can be advanced rapidly by continuously pressing button
"A" or "B".
4. Once the hands have been zeroed, return the crown to the normal position.
* Do not push the crown to the normal position while the chronograph 1/100 second
hand and the chronograph second hand return to zero position. Each hands stop
on the way when crown are returned to the normal position and these positions
RESET
are recognized as zero position.
"B"
17