GE IM-6D Manual Del Propietario E Instalación página 16

SET POWER SWITCH TO OFF
4
Set the icemaker power switch to OFF. Leave
the power switch in the OFF position until the
refrigerator is connected to the water supply to
prevent premature operation.
Power
Switch
(Appearance may vary)
5 INSTALL THE ICEMAKER FILL CUP
Install the icemaker fill cup
the icemaker as shown.
PLUG IN THE ICEMAKER
6
Holding the icemaker in place, insert the icemaker
power cord plug into the socket on the side wall,
making sure the prongs and holes are matched. Press
the plug firmly into the socket. Lock the plug in place
by clipping the restraints onto each side of the plug.
Make sure the restraints click into place.
Installation Instructions
15
MOUNT THE ICEMAKER
7
• Lift the icemaker so the fill tube (11 or 12) fits
in the fill cup opening (D). Hang the icemaker on
the two screws.
Make sure:
• The power cord is still firmly in the socket.
opening at the back of the icemaker. (Check
the rear of the refrigerator to make sure the fill
tube has not been pushed out of the back of the
refrigerator).
• The icemaker mounting screws are located in the
uppermost position of the mounting slots.
THEN SECURELY TIGHTEN THE ICEMAKER
MOUNTING SCREWS.
INSTALL THE ICE BUCKET
8
Place the ice bucket (9) under the icemaker.
Make sure the icemaker power switch is in the
OFF position.
ATTACH WARRANTY LABEL
9
A label (18) is provided with this kit to record the date
of installation for warranty purposes. Apply it to the
back of the refrigerator.
KEEP THIS MANUAL
10
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
or
11 12
D
9