Inflating other objects 12-13 Operating DC appliances Replacement Parts Notes NOTICE: If you experience any problems with the PSX2, please DO NOT return the unit to the place of purchase. Please call PowerStation’s Technical support staff toll free at 1-800-837-5994.
The compressor must be allowed to cool for ten minutes WARNING following each ten minutes of continuous use. Do not expose the PSX2 to temperatures greater than 104°F (40°C). The operational temperature range for the sealed lead acid battery is 5°F to 122°F (-15°C to 50°C) when discharged WARNING (or in use) and 32°F to 104°F (0°C to 40°C) when charged and...
Página 4
12V electrical systems. This unit is not designed to be used in the place of a vehicle CAUTION battery. This unit is not designed to be used as a battery charger. CAUTION PSX2 Owners Manual Page 2 030211...
Página 5
(6 or 12 V, etc.). Power sources other than batteries should not exceed 16 V DC for use with the 12 V systems, and 8 V DC for use with a 6 V DC system. continued PSX2 Owners Manual Page 3 030211...
Página 6
4. Be sure that the vent caps are tight and level on both batteries. Place a damp cloth over any vent caps on each battery making certain it is clear of fan blades, belts, and other moving parts. PSX2 Owners Manual Page 4 030211...
Thank you for purchasing the PowerStation PSX2. The PSX2 is a user-friendly & versatile product designed to instantly jumpstart vehicles, provide portable inflation and 12V DC power. The PSX2 also brings light to any situation with an integrated work light.
Contact your local waste management authority, toll free hotline 800-253-2687 or visit the website, www.earth911.org for disposal locations in your local area. Under normal conditions and when used as instructed, your PowerStation® battery should provide years of dependable service. 120V AC CHARGER Always wear eye protection when using your 140 PSI compressor unit.
Página 9
GETTING TO KNOW YOUR PSX2 continued BATTERY COMPRESSOR TEST ON/OFF LIGHT ON/OFF CABLE CHARGING FULL CABLES POWER CHARGE REVERSED CABLE CHARGING FULL CABLES POWER ON CHARGE REVERSED Figure 2 G. Battery test button CABLES REVERSED H. Voltmeter Work light J. Compressor gauge K.
We recommend charging the PSX2 on a regular basis. The initial charge could take up to 72 hours. Note: The PSX2 charger is fully automatic and maintains the battery charge as long as the PSX2 remains plugged into a wall socket with 110V power. Leaving your PSX2 plugged in will not damage the battery and ensures a fully charged battery at all times.
The following section will guide you through the use of your PSX2. Please note that while using various features of the PSX2 simultaneously is permissible, this will increase the load on the battery, thereby reducing run-time before recharging is necessary.
Página 12
OFF position. The reverse polarity warning function does not protect the PSX2 or your vehicle from damage if the cables are not correctly connected and the jumper cables power switch is in the ON position. If the red CAUTION “cables reversed”...
Using the Jumpstart The PSX2 can be used to jumpstart any standard size vehicle or boat with a single 12V starting battery. If you have any questions regarding how to jump start your vehicle, consult the vehicle owners manual or the vehicle manufac- turer before using the PSX2 jump start function.
Turn the jumper cables power switch to the “ON” position. Crank the engine. Do not crank for more than six seconds. Allow the PSX2 to cool for at least 3 minutes between six second jumpstart cycles. 10. After successfully starting the engine, turn the jumper cables power switch back to the “OFF”...
DC appliance. • 12V DC appliances vary greatly according to the amount of power they consume. The wattage consumed by a 12V DC appliance will impact the length of time the PSX2 will operate the appliance before the need to recharge the PSX2. The greater the wattage consumed, the lesser the duration of the PSX2 battery charge. The 12V DC outlet is equipped with an internal circuit breaker which will automatically cut power to the outlet if: the DC appliance causes a direct short or if the appliance draws excessive amperage.
Página 16
Operando los dispositivos DC Partes de repuesto Notes AVISO Si usted experimenta cualquier problema con el PSX2, por favor NO devuelva la unidad a su lugar de compra. Llame gratuitamente por favor al personal de soporte técnico de PowerStation al 1-800-837-5994.
ADVERTENCIA después de cada diez minutos de uso continuo. No exponga el PSX2 a una temperatura mayor a 104°F (40°C). El rango de temperatura operacional para una batería sellada de ácido/plomo es de 5°F a 122°F (-15°C a 50°C) cuando esté...
Página 18
12 voltios. Esta unidad no está diseñada para usarse en lugar de la batería PRECAUCIÓN del vehículo. Esta unidad no está diseñada para usarse como cargador de PRECAUCIÓN batería. Página 16 del manual del propietario PSX2 030211...
Página 19
Las fuentes de potencia, independientes de las baterías, no deberán exceder los 16 voltios DC para uso con los sistemas de 12 voltios, y no deberán exceder los 8 voltios DC con us sistema de 6 voltios DC. continuación Página 17 del manual del propietario PSX2 030211...
Página 20
4. Asegúrese que las tapas de ventilación estén apretadas y niveladas en ambas baterías. Coloque un trapo húmedo sobre las tapas de ventilación en cada batería, asegurándose que este esté libre de los hélices del ventilador, correas y otras partes móviles. Página 18 del manual del propietario PSX2 030211...
INTRODUCCIÓN Gracias por comprar el PSX2 de PowerStation. El PSX2 es un producto versátil, libre de mantenimiento y sencillo de usar, diseñado para instantáneamente arrancar vehículos, proveer trabajo de inflado portátil y alimentación DC de 12 voltios. El PSX2 brinda además iluminación en cualquier situación con una lámpara de trabajo integrada.
Contact your local waste management authority, toll free hotline 800-253-2687 or visit the website, www.earth911.org for disposal locations in your local area. Under normal conditions and when used as instructed, your PowerStation® battery should provide years of dependable service. manguera 120V AC CHARGER Always wear eye protection when using your 140 PSI compressor unit.
Página 23
L. Botón de ENCENDIDO/APAGADO de la lámpara de trabajo M. Luces indicadores: cable encendido/cargándose/carga completa/cables inversos N. Grampa positiva O. Grampa negativa P. Interruptor ENCENDIDO/APAGADO de los cables de arranque Q. Luz indicadora DEL de cables inversos Página 21 del manual del propietario PSX2 030211...
Nota: El corcel PSX2 es completamente automático y mantiene que la carga de batería siempre que el PSX2 se quede tapado en un enchufe de pared con el poder 110V. Salir su PSX2 conectó no dañará la batería y asegura una batería completamente cargada siempre.
2 horas de tiempo carga. EL USO DEL PSX2 La sección a continuación le guiará por el uso de su PSX2. Note por favor que es posible usar simultáneamente varias funciones del PSX2, esto aumentará la carga para la batería, consecuentemente reduciendo el tiempo de uso antes de que sea necesario una recarga.
Página 26
“APAGADO.” (“OFF”). La función de advertencia de polaridad inversa no protege el PSX2 ni su vehículo contra daños si los cables no están correctamente conectados o si el interruptor de encendido de los cables de arranque PRECAUCIÓN...
PSX2. Conecte la grampa del PSX2 al borne rojo positivo (+) de la batería. (ver la figura 2 en la página 21 para la ubicación N). Al momento de realizar las conexiones de arranque, nunca sobrecargue, sí...
Ponga el interruptor de potencia de los cables de arranque en la posición de ENCENDIDO (“ON”). Arranque el motor. No lo arranque por más de seis segundos. Deje que se enfríe el PSX2, por al menos tres minutos, entre cada ciclo de arranque de seis segundos.
PSX2 pueda operar el dispositivo antes de requerir una recarga del PSX2. El mayor vataje consumido, menor será la duración de la carga de la batería PSX2. La salida DC 12V viene equipada con un cortacircuitos interno el cual automáticamente cortará...
Están disponibles para la compra sólo aquellas piezas identificadas por número de pieza. Si usted sufra cualquier problema con su PSX2, por favor NO devuelva la unidad al lugar de compra. Llame gratuitamente por favor al personal de soporte técnico de PowerStation entre las horas de 8:30 a.m.