Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTING THE CONTROLLER TO Z CONTROL
Use the Mobile App (iOS and Android) (Continued)
5. The app will ask you to scan the data matrix QR
code on the controller. You can also bypass this
step and manually input the SSID of the controller,
which is found on the controller label.
6. When the captive screen opens, use the WiFi Scan
button to find the WiFi network you want the controller
to use, select it from the list provided at the bottom
of the screen (you may need to scroll), and type the
password in the field. The Z Control
solid within a minute, indicating successful connection
to the router and the Z Control
connecting to the cloud, the Basement Sentry controller
may immediately update its firmware over-the-air (OTA),
if an update is available. If an update is taking place,
the Z Control
LED will flicker for up to one minute while
®
the update is downloaded. The Z Control
solid and all other LEDs will turn off while the update is
being installed. After up to one minute, the controller will
restart and return to normal operation. The controller
alert history on the Z Control
updated with the firmware update information, and any
email accounts that are set up will be notified.
7. You can now return to the Z Control
your new device set up in the location you previously
selected. You can always change a device to a
different location in your account.
LED should be
®
Cloud. Upon first
®
LED will be
®
Cloud will also be
®
app to find
®
12
© 2020. All rights reserved.
®
5
Click to manually input SSID
6
Click WiFi
Scan button
7
SSID input field
Publicidad
