DeWalt D21441 Manual De Instrucciones página 21

CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
CAUTION: Used without the safety
alert symbol indicates a potentially
hazardous situation which, if not
avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fi re.
EC-Declaration of conformity
D21441
D WALT declares that these power tools have
E
been designed in compliance with: 98/37/EC
(until 28 December 2009), 2006/42/EC (from 29
December 2009), 2004/108/EC, EN 55014-1,
EN 55014-2, EN 61000-3-2 , EN 61000-3-3,
EN 60745-1, EN 60745-2-1, EN 60745-2-2.
For more information, please contact D
the address below, or refer to the back of the
manual.
The undersigned is responsible for compilation of
the technical fi le and makes this declaration on
behalf of D WALT.
E
Horst Großmann
Vice President Engineering and Product
Development
D WALT, Richard-Klinger-Straße 11
E
D-65510, Idstein, Germany
1-9-2007
Safety instructions
WARNING: To reduce the risk of injury,
read the instruction manual.
General power tool safety warnings
WARNING: Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may
result in electric shock, fi re and/or
serious injury.
Save all warnings and instructions for future
reference
The term "power tool" in the warnings refers to
your mains operated (corded) power tool or battery
operated (cordless) power tool.
1 Work area safety
a Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or
fumes.
WALT at
E
c Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2 Electrical safety
a Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodifi ed plugs and
matching outlets will reduce risk of electric shock.
b Avoid body contact with earthed or
grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an
increased risk of electric shock if your body is
earthed or grounded.
c Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts.
E N G L I S H
21