DeWalt D21441 Manual De Instrucciones página 23

● Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
● Hold power tool by insulated gripping
surfaces when performing an operation
where the cutting tool may contact hidden
wiring or its own cord. Contact with a "live"
wire will also make exposed metal parts of the
power tool "live" and shock the operator.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual
before use.
Residual risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
● Impairment of hearing.
● Risk of personal injury due to fl ying particles.
● Risk of burns due to accessories becoming hot
during operation.
● Risk of personal injury due to prolonged use.
● Risk of squeezing fi ngers when changing the
accessory.
● Health hazards caused by breathing dust
developed when working in concrete and/or
masonry.
Package contents
The package contains:
1 Rotary drill
1 Side handle
1 Depth gauge
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
● Check for damage to the tool, parts or
accessories which may have occurred during
transport.
● Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. A)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
Intended use
Your D21441 rotary drill has been designed for
professional drilling and screwdriving applications.
Do not use this tool under wet conditions or in
presence of fl ammable liquids or gases.
This rotary drill is a professional power tool. Do not
let children come into contact with the tool.
Supervision is required when inexperienced
operators use this tool.
1 Variable speed switch
2 Lock-on button
3 Forward/reverse slider
4 Two gear selector
5 Side handle
6 Depth adjustment rod
7 Keyless chuck
8 Sleeve
Auto-spindle lock
The auto-spindle lock is engaged when the
transmission is stationary. The chuck sleeve can
easily be turned with one hand while the other
supports the unit.
Electrical safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated in
E
accordance with EN 60745; therefore
no earth wire is required.
WARNING: 115 V units have to be
operated via a failsafe isolating
transformer with an earth screen
between the primary and secondary
winding.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organisation.
E
E N G L I S H
23