Grounding Instructions - Haier HMC1085SESS Manual Del Usuario

GROUnDinG inStRUCtiOnS

ElECtRiCal REqUiREMEntS
The electrical requirements are a 120 volt 60 Hz, AC only, 15 amp. It is
recommended that a separate circuit serving only the oven be provided. The oven
is equipped with a 3-wire cord having a 3-prong grounding plug. It must be plugged
into a wall receptacle that is properly installed and grounded.
This appliance must be grounded. In the event of an electrical short circuit,
grounding reduces risk of electric shock by providing an escape wire for the electric
current. The cord provided with this appliance is equipped with a grounding wire
and a grounding plug. The plug must be plugged into an outlet that is properly
installed and grounded. Do not attempt to defeat this safety feature by modifying
the plug in any way.
Improper use of the grounding plug can result in a risk of electric shock.
Consult a qualified electrician or serviceman if:
1) The grounding instructions are not completely understood.
2) You are unsure that the appliance is properly grounded.
3) You have any questions about the grounding or electrical instructions.
POWER SUPPly CORD
1. A short power supply cord is provided to reduce the risk of becoming entangled in
or tripping over a longer cord.
2. If the power supply cord is too short, do not use an extension cord. Have a
qualified electrician or serviceman to install an outlet near the appliance.
3. If it is absolutely necessary to use longer cord sets or an extension cord, extreme
care must be exercised.
a) Use only a grounding type 3-wire extension cord that
has a 3-blade grounding plug and a 3-slot receptacle
that will accept the plug on the appliance.
b) The marked electrical rating of the cord set or extension
cord must equal to or greater than the electrical rating
of the appliance. The longer cord should be arranged
so that it will not drape over the counter top or table
top where it can be pulled on by children or tripped over
unintentionally.
nOtE: Neither Haier nor the dealer can accept any liability for damage to the oven
or personal injury resulting from failure to observe the electrical connection
procedures.
WaRninG
Page 6 • Safety InformatIon