Publicidad
Idiomas disponibles
Idiomas disponibles
The third menu is the one defined as EXTENDED 2 and to access the programmable functions follow the instructions given in Tab. 4:
E X T E N D E D
• Press the SELECT button and scroll the LED menu until you reach
MENU 2
the LEV LED;
• Press SET twice to access the EXTENDED menu 2.
LIVEL 2 - EXTENDED MENU 2
LED
FUNCTION
L1
BRAKE
Enabling of the electronic brake
L2
STEP BY STEP 1
Step-By-Step logic
L3
ALWAYS CLOSE
Enables the sending of a CLOSE
command when the power is
turned on again
L4
FOLLOW ME
The motor automatically closes in
5 sec after passing through DS1
photocell
L5
PEDESTRIAN TIME
Storage of motor no.1 partial
stroke with slowdowns
L6
2°CH
MONOSTABLE
/
Setting the aux. relay of the
BISTABLE/TIMED MONO.
2°CH as Bistable / Monostable /
Temporised monostable
L7
REMOTELY PROGRAMMING
Enable
memory function without acting
on the control unit
Table 4
The fourth and last menu is defined as EXTENDED 3 and to access the programmable functions follow the instructions given in Table 5:
E X T E N D E D
• Press the SELECT button and scroll the LED menu until you reach
MENU 3
the LEV LED;
• Press SET 3 times to access the EXTENDED menu 3.
LIVEL 3 - EXTENDED MENU 3
LED
FUNCTION
L1
SOFT STOP
Setting of gradual slowdown at
the end of the movement
L2
SOFT START
Setting of gradual slowdown at
the beginning of the movement
L3
RELEASE STROKE MAX FORCE/
Activation of the push in opening
RELEASE STROKE
for electric lock release
L4
SLAM LOCK MAX FORCE /
Activation of the push in closing
SLAM LOCK
for electric lock release
L5
ELS / CMD PED
Activation of the electric lock as
PPED input
L6
LAMP / L.CORT L.SPIA / LAMP
Flashing light set as pilot light or
L.CORTESIA
courtesy light
L7
PRELAMP / LAMP IN PAUSA
Activation of the pre-flash for
3 s. before the CLOSE cycle /
Flashing in pause time
Table 5
ATTENTION: The control unit allows to be programmed if all the safety devices (N.C. inputs on terminals) grant a contact closed.
COMUNELLO ®Copyright 2021 - All rights reserved
42
DESCRIPTION
Always enabled
Open-Stop-Close-Stop (It DOESN'T close after the pause time in a
partial opening phase)
Enabled function
Enabled function
Partial stroke of motor no.1 stored
Bistable command
the
remote
control
Enabled function
DESCRIPTION
Enabled function
Enabled function
Enabled function at the max
FORCE
Enabled function at the max
FORCE
Enabled function
Flash. Courtesy light
Preflash in CLOSE
il LED della funzione LEV LAMPEGGIA con questa frequenza:
LED ON
Always enabled
Disabled function
Disabled function
Disabled function
10 sec., without slowdowns
Temporized 3 min.
Monostable
(impulsive)
Disabled function
The LED of the LEV function FLASHES with this frequency
LED ON
Disabled function
Disabled function
Enabled
function
-
FORCE
Disabled function
trimmer
Enabled
function
-
FORCE
Disabled function
trimmer
Disabled function
Flash.
court. light.; Pilot light
Flashing light
Flash.
Fllash in pause time
Disabled function
LED OFF
DEFAULT
command
LED OFF
DEFAULT
Publicidad
