Suntec Wellness Klimatronic Impuls plus Manual De Instrucciones página 16

Possible installation errors
• Make sure that the outlet is not blocked to prevent damage to the unit.
• The exhaust hose should not be bent (Fig. 4).
Control panel
⑨ ⑩
⑧
1 Power
2 Mode
3 Sleep mode
4 Temperature -
5 Temperature +
6 Timer
7 Fan
8 Remote control receiver
9 Water tank indicator
10 Compressor indicator
1. POWER: Press the button to turn the unit on or off. The unit automatically starts in cooling mode with low fan
speed.
2. MODE: Press the Mode button after starting the unit to select between cooling, dehumidifying or fan mode.
3. FAN: Press the Fan button after starting the unit and adjust the desired fan speed.
4. TEMPERATURE - / TEMPERATURE +: Switch the unit into the cooling mode and use these buttons to adjust
desired room temperature (16-31° C).
5. SLEEP MODE: Switch the unit into the cooling mode and press this button to de- or activate the sleep mode.
6. TIMER: Turn the unit on and leave it in standby mode, then press this button to set the timer. You can set the
desired on or off time using the ▲ and ▼ keys (1h-24h).
⑪ ⑫ ⑬
⑦ ⑥ ⑤
11
12
13
14
15
16
17
18
19
⑭ ⑮ ⑯ ⑰ ⑱ ⑲
④ ③
Indicator for high fan speed
Indicator for low fan speed
Timer indicator
Display
Sleep mode indicator
Cooling mode indicator
Dehumidifying mode indicator
Fan mode indicator
Power indicator
② ①
16