CRESTO SIMO S Manual De Instrucciones página 4

EN
this user's instruction, maintenance and inspection instruction to the language
where the product is to be used.
M A I N T E N A N C E A N D T R A N S P O R T
NOTE! The equipment shall be stored in a dry, dark and well-ventilated
location, protected against steam, sharp edges, vibration and UV-light. The
equipment shall be kept clean for best functionality and durability. Metal parts
can be blown clean with compressed air. Avoid lubricating oil! Lightly soiled
equipment can be washed with a brush in lukewarm water. A mild soap solution
can be used. Heavily soiled equipment can be machine-washed in a wash-bag
with phosphate-free detergent in a 40° program. Wet equipment is hung up to
dry. Equipment shall be allowed to air-dry without being subjected to open fire
or any other heat source.
I N S P E C T I O N
Warning! For the user's safety the product shall be inspected at least every
twelve months in order to ensure its functionality and durability (refer to
EN 365). The inspection can be registered in Inspector online at
crestogroup.com.
NOTE! In cases of frequent usage of the equipment or in aggressive
environment, inspections shall be carried out at more frequent intervals (as
decided by a trained competent person).
Warning! The inspection shall be carried out by a competent person (a person
who has been trained and is competent in fall protection equipment inspection)
who holds a certificate for inspection and in accordance with the
manufacturer's inspection procedure as well as EN 365.
NOTE! The product's label marking must be legible! (The lanyard is also fitted
with a RFID/NFC chip for traceability if the label is not legible).
L O G
Each component in a fall protection system (EN363:2008) shall be entered in a
log or equipment register.
This is to be completed by a "competent person" at least every twelve months.
(Refer to Inspector at crestogroup.com for more information). Documentation
is available for download at crestogroup.com/documentation to support your
equipment menagement and record keeping.
R E P A I R S
Repairs to the products may only be carried out by the manufacturer.
S U S T A I N A B I L I T Y & R E C Y C L I N G
We design and manufacture premium products, with premium materials, to be
used actively and to last long.
When the product is decided to be taken out of use, or its maximum lifetime
has expired, it should be recycled according to your local legislations. Our
products are made of polyester, polyamide or PVC and metal components.
If necessary dismantle the metal components before recycling. You can also
send the complete product to Cresto and we will take care of the recycling in
order to reduce our impact on the environment.
C O M P L I A N C E
EU type evaluation certificate: Notified Body: 0402
EU type inspection and production control: Notified Body: 0402
Notified Body: 0402
SE-501 15 Borås
RISE
Box 857
Sweden
www.ri.se