Sharp CD-M10000V Manual De Manejo página 11

Ocultar thumbs Ver también para CD-M10000V:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

„ Speaker connection
Main speakers:
Connect the black wire to the MAIN (-) terminal, and the blue wire to the MAIN (+) ter-
minal.
Woofers:
Connect the black wire to the WOOFER (-) terminal, and the red wire to the
WOOFER (+) terminal.
Main speaker (Right)
Woofer
(Right)
Red
Black
Blue
Caution:
z Connect the speaker wires to the speakers first, then to the unit.
z Never mistake the MAIN and the WOOFER terminals. The unit or the speakers
may be damaged.
z Only the included speakers should be used with this product. Do not use other
speakers with this unit or use the supplied speakers with other units.
z Do not mistake the right and the left channels. The right speaker is the one on the
right side when you face the unit.
z Do not let the bare speaker wires touch each other.
z Do not allow any objects to fall into or to be placed in the bass reflex ducts.
z Do not stand or sit on the speakers. You may be injured.
Incorrect
Bi-amp system:
This unit employs the bi-amp system in which the low frequency range power ampli-
fier drives woofers, and mid-to-high frequency range power amplifier drives woofers
and tweeters of the main speaker respectively. Clearer sound will be assured by
amplifying two frequency bands individually using two characteristically different
amplifiers.
Main speaker (Left)
Woofer
(Left)
„ TV/monitor connection
If the TV/monitor has a video input, connect it to VIDEO OUT socket on the rear of
the unit.
Note:
If the TV/monitor does not have a video input, the VIDEO OUT socket on the unit
should be connected to a VCR with a video input, which in turn should be connected
to the TV/monitor through the TV ANTENNA/CABLE input. (Be sure to turn on the
Incorrect
VCR, and set the VCR's input mode to "auxiliary".)
Mid-to-high range
(200 Hz - 20 kHz)
Woofer
Power amplifier
Tweeter
Pre-amplifier
Woofer
Pre-amplifier
Woofer
Power amplifier
Ultra-low range
(60 Hz - 200 Hz)
01/10/30
CD-M10000V(X)E1.fm
CD-M10000V
ENGLISH
L-ch
TV
To video
input socket
Video cable
E-10
1
2
3
4
5
6
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cp-m10000

Tabla de contenido