Sharp CD-M10000V Manual De Manejo página 27

To interrupt playback:
Press the CD button on the remote control.
To resume playback from the same point, press the
To stop playback:
Press the button.
To remove the CDs:
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to
rotate the disc tray and remove the remaining disc.
z If the DISC SKIP button does not allow to rotate the disc tray (you cannot remove
the disc), close and open again the tray.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
The following playback functions are the same as video CD opera-
tions.
Direct search system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Repeat or random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Notes:
z Whilst in the "VCD ON" state, you cannot play back audio CDs.
z During playback, you can select another disc by pressing either of the DISC SKIP
button or one of the 1 - 3 buttons.
z Whilst the disc is being read ("TOC READ" is displayed), another disc cannot be
selected even if you press the DISC SKIP button or one of the
Caution:
z Do not place two CDs in one disc tray.
z Do not push the disc tray whilst it is moving.
z Do not turn the disc tray by hand. This may cause malfunctions.
z If the power fails whilst the tray is open, wait until the power is restored.
z If the disc tray is stopped forcibly, "ER-CD10" will appear in the display and the unit
will not function. If this occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
z If TV or radio interference occurs during CD operation, move the unit away from
the TV or radio.
z If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.
„ To locate the beginning of a track
button.
To move to the beginning of the next track:
Press the
To restart the track being played:
Press the
Notes:
z You can locate the beginning of a track on a single disc only.
z The or
track.
Page
„ To locate the desired portion
For fast forward:
Press and hold down the
For fast reverse:
1 - 3 buttons.
Press and hold down the
Notes:
z Normal playback will resume when the
button is released.
z The or
tion.
PRESET button for less than 0.5 seconds during playback.
z You can skip to any track by pressing the
PRESET button repeatedly until the
desired track number appears.
PRESET button for less than 0.5 seconds during playback.
z You can skip to any track by pressing the
PRESET
the desired track number appears.
button on the remote control allows you to locate the beginning of a
PRESET button during playback.
PRESET button during playback.
PRESET
button on the remote control allows you to locate the desired por-
01/10/30 CD-M10000V(X)E3.fm
CD-M10000V
ENGLISH
button repeatedly until
or PRESET
E-26
1
2
3
4
5
6
7