Ac Charging - EcoFlow DELTA Max Manual Del Usuario

3.4 AC Charging

EcoFlow's X-Stream fast charge technology is specifically designed for AC charging. You can control
the charging power through the AC Charge Speed Switch. When set to the top, you will have the
maximum charging speed. When set to the bottom it'll be at your custom speed, which is 400W by
default, customizable in the EcoFlow App. In case of unusual situations where the AC input current
remains higher than 20A, the X-Stream charging input port will initiate a self-protection function,
and the Overload Protection Switch on the product will automatically pop up. After confirming that
there is no product failure, you can press the Overload Protection Switch to resume charging.
The charging power can be adjusted through the AC Charge Speed Switch on the back of the
product. You can set the charging power range in the EcoFlow App.
Please use EcoFlow AC charging Cable for fast charging. AC Charging Cable should directly plug into
15A(or above) wall outlet. EcoFlow takes no responsibilities for any consequences caused by failures to
follow instructions, including but not limited to charging with AC charging Cable.
<2 hrs Full Charge
AC Charging
Cable
X-Stream Fast Charging
Maximum Charging Mode
Customized Charging Power Rate Range
200W to maximum Input Power
(Default: 400W)
EcoFlow App
7