Remote Controller Installation Position; Mounting On A Wall - Panasonic CS-ME7NKE Manual Técnico Y De Servicio

5. Remote Controller Installation Position

The remote controller can be operated from either a
non-fixed position or a wall-mounted position.
To ensure that the air conditioner operates correctly,
do not install the remote controller in the following
places:
In direct sunlight
�
Behind a curtain or other place where it is covered
�
More than 8 m away from the air conditioner
�
In the path of the air conditioner's airstream
�
Where it may become extremely hot or cold
�
Where it may be subject to electrical or magnetic
�
interference
Where there is an obstacle between the remote
�
controller and the air conditioner (since a check
signal is sent from the remote controller every 5
minutes)

5-1. Mounting on a Wall

Before mounting the remote controller, press the
ON/OFF operation button at the mounting location to
make sure that the air conditioner operates from that
location. The indoor unit should make a beeping
sound to indicate that it has received the signal.
All manuals and user guides at all-guides.com
Remote control
holder
Mounting screws
4 16 (included)
To take out the remote controller, pull it forward.
Press
Set in
place
Fig. 61
18
Rear side
Hole
To prevent loss of the remote
controller, you can connect the
remote controller to the holder by
passing a string through the remote
controller and attachment hole.