Quick Start Instructions; Connections & Controls In Aa-160 Basic Amplifier - Panphonics AA-160 Basic Manual Del Usuario

2. QUICK START INSTRUCTIONS

SPEAKER
1
2 3
Make sure you have all the provided equipments (AA-160 Basic Amplifier/
Power Supply/Power cord).
Connect Panphonics speaker D-connector to amplifier ( 1 ). Connect RCA cable
to the media player and to amplifier ( 4 ). Make sure that the power switch ( 3 )
is turned OFF, then connect power supply cables to amplifier. Connect power
supply cables to electricity socket. Turn the power switch ON ( 3 ). Adjust the
volume by rotating the volume knob ( 6 ).
Designed for Panphonics plane wave transducers and
Sound Shower product only.
4 5
6
3. CONNECTIONS & CONTROLS IN AA-160 BASIC AMPLIFIER
1. Speaker out connector
Amplifier output for a speaker. Use
only Panphonics speakers and audio
elements.
2. Power input connector
Input for the provided power supply.
3. Power switch
Manual switch to turn the amplifier on
and off.
4. RCA input
Input for unbalanced connections. The
connector is summed to mono internally.
When connecting a media player set the
media players output volume (when
adjustable) as high as possible without
causing any distortion to the AA-160
amplifiers input stage. If the full volume
setting causes distortion to the input of
the AA-160 amplifier, lower the media
players output volume. Set the final
output volume by using the AA-160
amplifiers Volume Knob ( 6 ).
5. LED signal light
Green light informs that the amplifier is
functioning properly at an appropriate
volume level. Red light informs that the
amplifier's volume level is set too high.
6. Volume knob
Rotate to adjust the output level of the
AA-160 Basic amplifier.