Other Functions - Würth 0772 150 000 Manual De Instrucciones

Manual override mode
Danger posed by spark build-up and severe heat.
Â
¾ Use this function with extreme caution and only in
¾ Check the exact polarity of the vehicle battery
¾ Pay particular attention that the red positive
¾ Never touch the red positive terminal clamp with
¾ Do not use this function in the case of any
Note
Manual override mode is used for deep-discharging
vehicle batteries (voltage below 2 V). If the voltage of
the vehicle battery is below 2 V, the boost LED (white)
is off [5].
▸ To activate the manual override function, press the manual over-
ride button [7] for 3 seconds.
3 The boost LED [5] starts to flash. The device has switched to
manual override mode.
Powerbank function
▸ Connect an external device such as a smartphone or tablet to
the USB output socket to charge the external device.

Other functions

Spark and reverse battery protection are deacti-
vated in this function. Currents of up to 4,000 A
possible.
exceptional circumstances.
beforehand.
terminal clamp is connected to the positive terminal
and the black negative terminal clamp is connected
to the negative pole of the vehicle battery of the
vehicle.
the black negative terminal clamp / ground point
on the vehicle.
uncertainty.
DANGER!
17