General Characteristics - Cembre B35-50MA Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

ENGLISH
BATTERY OPERATED HYDRAULIC CRIMPING TOOL

1. GENERAL CHARACTERISTICS

TOOL TYPE:
Application range:
Crimping force
Rated operating pressure
Dimensions LxWxH
Weight with battery
Motor
Battery type CB1820L
Recommended oil:
Safety:
Operating temperature
Battery charger ASC30-36
Input
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent
A at the work place L
– The maximum value of the weighted acoustic displacement
pressure C at the work place L
– The acoustic power level emitted by the machine
L
is equal to ....................................................................................................................................................... 69,3 dB (A)
WA
Risks due to vibration (Directive 2006/42/EC, annexe 1, point 2.2.1.1)
Tests carried out in compliance with the indications contained in UNI ENV 25349 and UNI EN 28662 part
st
1
Standards, and under operating conditions much more severe than those normally found, certify that
the weighted root mean square in frequency of the acceleration the upper limbs are exposed to for
each biodynamic reference axis is 0,527 m/sec
The part reference includes the following:
– Basic tool complete with battery.
– Spare battery.
– Battery charger (model depends on the tool version).
– Plastic carrying case.
suitable for installing electrical compression connectors
kN (sh ton):
bar (psi):
mm (inches):
kg (lbs):
Volt DC:
Volt / Ah:
°C (°F):
Volt / Hz:
W:
is equal to .............................................................................................................. 64,9 dB (A)
pA
is equal to ........................................................................................ 99,7 dB (C)
pCPeak
B35-50MA
for conductors up to 150 mm
390 (5,600)
387 x 133 x 81 (15.2 x 5.2 x 3.2)
2,6 (5.7)
18 / 2.0 Li-Ion
AGIP ARNICA 22 or ESSO INVAROL EP22 or equivalent
the tool is equipped with a maximum pressure valve
-15 to +50 (+5 to +122)
USA/CAN
27046000
2
max.
2
(300 MCM)
35 (4)
18
115 / 60
85
4

Publicidad

Tabla de contenido
loading

Tabla de contenido