Storing, Recalling, And Erasing Measurement Data - Healthy Living Premium Deluxe Thinline BSP-4007 Manual Del Usuario

Storing, recalling, and erasing
measurement data
Storing data
After each measurement, the systolic and diastolic rates, pulse
rate and the time & date will be automatically stored.
* The memory holds data for the latest 80 measurements in each
of 3 memory zones. If more than 80 measurements are entered
in each zone, the memory will automatically clear out the old-
est data.
Recalling data
a. Press the " " or " " button to select the memory zone.
b. Press the "MEM" button to get your stored memory data.
* If there is no data in the memory nothing will appear.
* If there is data in the memory, the first reading will
be an average of the last three recorded set of
measurements (systolic and diastolic pressure
and pulse rate).
c. Press the "MEM" button again and the latest
recorded set of measurements will appear along
with the recording time and date.
d. Press the " " button to read the next set of stored data. The
data displayed starts with the most recent reading and con-
tinues backwards to the oldest.
* If your memory readings are out of range of your preset per-
sonal Alert levels. They will flash or show SMILING FACE
symbol as explained on the previous page.
* No Irregular Heartbeat Detector Record will be stored in memory.
20

Storing, recalling, and erasing measurement data

All manuals and user guides at all-guides.com