STARFRIT 024221 Instrucciones De Uso página 5

TO ASSEMBLE
(Read the instructions before first use)
WARNING: BLADES AND TIP OF THE FOOD PUSHER ARE
SHARP, HANDLE WITH CARE. NEVER USE FINGERS OR
UTENSILS TO PUSH DOWN THE FOOD, ALWAYS USE THE
FOOD PUSHER PROVIDED.
1. Place the lid attachment on the cup. Make sure it fits flat.
2. Insert the whisk adaptor next to the food pusher and turn
clockwise toward the
3. Insert the motor body into the whisk adaptor and turn
clockwise toward the
4. Insert the food pusher in the produce cutting chute.
USING HAND BLENDER
(Read the instructions before first use)
WARNING: BLADES AND TIP OF THE FOOD PUSHER
ARE SHARP, HANDLE WITH CARE. ALWAYS HANDLE
THE SPIRALIZING BLADES BY THE SAFETY TAB. NEVER
USE FINGERS OR UTENSILS TO PUSH DOWN THE FOOD,
ALWAYS USE THE FOOD PUSHER PROVIDED.
NOTE: During first use of the appliance, smoke and/or a slight
odor may occur from the appliance. This is normal and will
quickly disappear. It will not recur after appliance has been
used a few more times.
NOTE: Do not operate the appliance for more than 1 minute
continuously. Let the appliance cool off for 3 minutes between
each cycle.
1. Insert the upper part of the blending arm into the motor
body and turn counter clockwise until a click sound is
heard to securely lock in place (Fig. 2).
NOTE: Turn the motor body counterclockwise to remove
from the main unit (Refer to Fig. 6).
2. Plug the power cord into a 120V AC wall outlet.
3. The hand blender can be used directly in a pot, a bowl or
the graduated cup. To prevent splashing, do not turn the
hand blender on until the blade is beneath the surface of
the mixture.
NOTE: DO NOT use the hand blender in a non-stick pot
as the blade may damage the non-stick coating.
4. Holding the rubberized handle firmly with one hand, press
on the normal
NOTE: Adjust the blending speed by rotating the speed
control dial on top of the hand blender clockwise. ONLY
when using the normal
will have no effect when used with TURBO speed. (Fig. 3).
5. When blending is complete release the speed control to
stop the appliance.
6. Unplug the power cord from the electrical outlet.
(Fig. 1)
icon to securely lock in place.
icon to lock in place.
or TURBO speed to start blending.
speed.The speed control dial
FIG. 1
FIG. 2
FIG. 3
5