Device Description; Preparing The Measurement - Beurer BM 45 Manual De Instrucciones

• Avoid using this device directly next to other devices or
stacked on top of other devices, as this could lead to faulty
operation. If, however, it is necessary to use the device in the
manner stated, this device as well as the other devices must
be monitored to ensure they are working properly.
• The use of accessories other than those specified or pro-
vided by the manufacturer of this device can lead to an
increase in electromagnetic emissions or a decrease in the
device's electromagnetic immunity; this can result in faulty
operation.
• Failure to comply with the above can impair the performance
of the device.

3. Device description

1 2 3
1. Cuff
2. Cuff line
3. Cuff connector
4. Connection for mains part
5. Display
4
SYS
9
mmHg
DIA
mmHg
8
PUL
/min
6. Memory buttons M1/M2
7. Start/stop button
8. Risk indicator
9. Connection for cuff connector (left-hand side)
Information on the display:
1. Date / time
2. Systolic pressure
3. Diastolic pressure
4. Calculated pulse value
5. Pulse symbol
6. Release air (arrow)
7. Number of memory
space/memory display
average value ( ),
morning ( ),
evening ( )
8. Battery replacement
symbol
5
9. User memory
10. Risk indicator
11. Cardiac arrhythmia symbol
6

4. Preparing the measurement

Inserting the batteries
7
• Remove the battery compart-
ment lid on the rear of the
device.
• Insert four 1.5 V AA (alkaline
type LR 06) batteries. Make sure
21
11
10
9
8
7 6 5
4 x 1,5V AA (LR06)
1
2
3
4