Preparing For The Installation Of The Tv Or Lcd Monitor; Kd-85Xh90Xx / 75Xh92Xx / 75Xh90Xx Ke-85Xh90Xx / 75Xh92Xx / 75Xh90Xx Fw-85Bz40H / 75Bz40H - Sony SU-WL450 Manual Del Usuario

6
Install the Base (20)  on the
wall using suitable screws (not
supplied).
Note
 Use four or more screws of 8 mm diameter or equivalent
(not supplied).
 Use a level to check whether the Base (20)  is level.
 Fit four screws to the holes of Base Adaptor  with
Base (20)  (2-a only).
2-a


2-b

Preparing for the installation
of the TV or LCD Monitor
Make sure to attach the Table-Top Stand
before installing the TV or LCD Monitor to the
wall by referring to the Setup Guide.
KD-85XH90xx / 75XH92xx /
75XH90xx
KE-85XH90xx / 75XH92xx /
75XH90xx
FW-85BZ40H / 75BZ40H
1
Mark the installation location on
the wall.
 Use masking tape, etc. (not supplied) to
mark the location of the TV or LCD
Monitor near the Base or Base Adaptor.
Refer to the following table.
Screen centre point
(mm)
Model Name
KD-85XH90xx
KE-85XH90xx
FW-85BZ40H
KD-75XH92xx
KD-75XH90xx
KE-75XH92xx
KE-75XH90xx
FW-75BZ40H
− 12 (GB) −
(1,000)
(300)
Masking tape
1,899 471 200
1,674 372 150
43
8