Designated Use - Cleco 936400PT Manual De Instrucciones

1.3 Basic requirements for safe working practices
WARNING!
Electrical safety
Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries

may exhibit unpredictable behaviour resulting in fire, explosion or risk injury.
Do not open the battery.

Protect the battery from moisture.

Do not operate the battery in the open air.

Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or tempera-

ture above 130° C may cause explosion. The temperature of 130° C can be replaced by the tempera-
ture of 265 F.
Never operate the battery under unsuitable ambient conditions (i.e. where combustible gases, solvents,

dust, vapors or moisture is present).
Have servicing performed by a qualified repair person using only identical replacement parts. This will

ensure that the safety of the product is maintained.
Safety of persons
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the
battery may cause irritations or burns.
Work area
Ensure that there is enough space in the work area.

Keep the work area clean and dry.

1.4

Designated use

• The battery is intended solely for supplying power to the CLECO cordless EC tool.
• Do not use it in areas where there is a risk of explosion.
• Only use the following CLECO battery charger for charging:
Order No.
936491PT
1.5 Items supplied
Check shipment for transit damage and ensure that all items have been supplied:
1 Rechargeable battery
1 Instruction Manual
1.6 Transport
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.
Observe special requirements on packaging and labeling when being transported.

2070b_1_5en_bedingt.fm, 24.06.2015
Only for EU countries:
Do not dispose of electric equipment
together with household waste material!
Battery Charger
Li-Ions 44 / 26 V (85 – 270 VAC), single
P2070BA/EN 2015-06
EN
1
Safety
19