Replacing The Battery; Inserting The Battery - Cleco 936400PT Manual De Instrucciones

Charging temperature
0 °C to +40 °C (32 °F to 104 °F).
With proper use, the battery can be charged at least 800 times (60 % capacity). Here, the following is
important:
Do not totally discharge the battery (< 32 V).

Follow the safety instructions printed on the battery and charger.

Fully charge new batteries or those not used for a long time.

Protect the battery from impact.

Keep the charger and battery contacts clean and dry.

The battery can remain in the charger when not in use thanks to very low self-discharge.

Replace and recycle used batteries (see 10 Disposal, page 24.)

4

Replacing the battery

Abb. 4-1
If not in use for more than 100 hours:
Remove battery from tool.

Abb. 4-2
2070b_1_5en_bedingt.fm, 24.06.2015
EN
Disharging temperature
0 °C to +45 °C (32 °F to 113 °F)
1.
2.
P2070BA/EN 2015-06

Inserting the battery

Insert the battery into the tool guide until it

securely engages.
Removing the battery
Push the catches back and pull the battery out

of the handle.
4
Replacing the battery
21