Setup 2: Connect The Video Signal Cables - Sony SDM-S73E Manual De Instrucciones

Setup 2: Connect the video signal
cables
• Turn off the monitor and computer before connecting.
• When connecting the computer to the monitor's HD15
input connector (analog RGB), refer to "Connect a
computer equipped with an HD15 output connector
(analog RGB)." (page 7)
Notes
• Do not touch the pins of the video signal cable connector as this
might bend the pins.
• Check the alignment of the HD15 connector to avoid bending the
pins of the video signal cable connector.
1 Slide up the back cover.
2
Tilt the display forward.
Connect a computer equipped with a DVI output
connector (digital RGB) (SDM-S74E only)
Using the supplied DVI-D video signal cable (digital RGB), connect the
computer to the monitor's DVI-D input connector (digital RGB).
to the computer's DVI output
connector (digital RGB)
back cover
to the DVI-D input
connector
(digital RGB)
DVI-D video signal
cable (digital RGB)
(supplied)
Connect a computer equipped with an HD15
output connector (analog RGB)
Using the supplied HD15-HD15 video signal cable (analog RGB),
connect the computer to the monitor's HD 15 input connector (analog
RGB).
Connect the computer according to the following illustrations.
x Connecting to an IBM PC/AT or compatible
computer
to the computer's HD15
output connector
(analog RGB)
IBM PC/AT or
compatible computer
x Connecting to a Macintosh computer
to the computer's
HD15 output connector
(analog RGB)
Macintosh computer
When connecting a Macintosh computer, use an adapter (not supplied),
if necessary. Connect the adapter to the computer before connecting the
video signal cable.
to the HD 15
input connector
(analog RGB)
HD15-HD15 video signal
cable (analog RGB)
(supplied)
to the HD 15
input connector
(analog RGB)
HD15-HD15 video
signal cable (analog
RGB) (supplied)
7
GB