Panasonic CW-XC55HU Instrucciones De Instalación Y Operación página 6

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Remote controller
Precaution:
The Remote Controller will not function properly if strong light strikes the sensor window of the air
conditioner or if there are obstacles between the Remote Controller and the air conditioner.
OPERATION BUTTON
• To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.
• This button takes priority over any other buttons.
• When you first turn it on, the air conditioner is on the High cool mode and the temp. at 72°F (22°C).
ROOM TEMPERATURE SETTING BUTTON
This button can automatically control the temperature of the room. The temperature
can be set within a range of 60°F to 86°F by 1°F. (16°C to 30°C by 1°C)
Select a lower number for a lower temperature in the room.
ON/OFF TIMER BUTTON
• You can set the time when the unit will turn on or turn off automatically by pressing the timer
button. If the unit is in operation, this button controls the time it will be turned off. If the unit is
in off state, this button controls the time it will start. Every time you push this button, the
remaining time will be set as follows:
- STOPPING OPERATION
• Every time you push this button, when the air conditioner is operating, timer is set as
¡
¡
follows : (1Hour
2Hours
¡
¡
8Hours
9Hours
10Hours
• The Setting Temperature will be raised by 2°F (1°C) 30 min. later and by 2°F (1°C) after
another 30 min.
- STARTING OPERATION
• Every time you push this button, when the air conditioner is not operating, timer is set as
¡
¡
follows : (1Hour
2Hours
¡
¡
8Hours
9Hours
10Hours
OPERATION MODE SELECTION BUTTON
• Every time you push this button, it will toggle between COOL, ECONOMY, FAN
and DRY.
ECONOMY
• If you push this button, the fan stops when the compressor stops cooling. Approximately every
3 minutes the fan will turn on and check the room air to determine if cooling is needed.
FAN SPEED SELECTION BUTTON
Every time you push this button, it is set as follows.
¡
¡
{High(F2)
Low(F1)
How to Insert Batteries
1.
Remove the cover from the back of the
remote
controller
2.
Insert two batteries.
• Be sure that the (+) and (-) directions are
correct.
• Be sure that both batteries are new.
3.
Re-attach the cover.
¡
¡
¡
3Hours
4Hours
5Hours
¡
¡
¡
11Hours
12Hours
0Hour
¡
¡
3Hours
4Hours
5Hours
¡
¡
¡
11Hours
12Hours
0Hour
High(F2)...}.
¡
¡
6Hours
7Hours
¡
¡
¡
1Hour
2Hours
...)
¡
¡
¡
6Hours
7Hours
¡
¡
¡
1Hour
2Hours
...)
• Do not use rechargeable batteries.
Such batteries
differ from standard dry cells in
shape, dimensions, and
performance.
• Remove the batteries from the
remote controller if the air
conditioner is not going to be used
for an extended length of time.
• Keep the remote control away from
infants and small children to
prevent them from accidentally
swallowing the batteries.
6
OPERATION
TEMP
TIMER
MODE
FAN SPEED
ECONOMY

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido