For Safe Operation; Warnings And Cautions - DNP DS-621 Guía De Inicio

For Safe Operation

• Be sure to read this document before using the product. After reading, keep it in a safe place where it can be easily
accessed as needed.
• The warnings listed here are to ensure proper use of the product, to prevent physical injury to the customer or other
persons, and to prevent property damage. Please follow these warnings.

Warnings and Cautions

The possible levels of injury or damage due to misuse are categorized below as Warnings and Cautions, according to
the degree of danger involved.
Accidents caused by failure to heed the warnings accompanying this symbol may lead to
Warning
serious or fatal injury.
Accidents caused by failure to heed the cautions accompanying this symbol may lead to
Caution
physical injury or property damage.
Symbols
The symbols shown have the following meanings:
This symbol indicates warning and caution messages.
The warning content is indicated in or near the symbol.
This symbol indicates prohibited actions.
The prohibited action is indicated in or near the symbol.
This symbol indicates necessary actions or instructions.
The action is indicated in the symbol.
• This unit has no power switch. When installing the unit, incorporate a readily accessible disconnect device in the fi xed wiring,
or connect the power plug to an easily accessible socket-outlet near the unit. If a fault should occur during operation of the
unit, operate the disconnect device to switch the power supply off, or disconnect the power plug.
• Use the product only with the designated voltage and frequency. Improper connection may cause an electric shock or fi re.
• Avoid connecting too many devices to the outlet used for this product and using extension cords. The outlet may overheat and
cause a fi re.
• Do not damage, cut, bundle, or alter the power cord. Also, the cord may be damaged if heavy objects are placed on it, or if
pulled or bent with excessive force, and it may cause a fi re or an electric shock.
• Do not install the product in places with salinity or corrosive gases in the air. This may cause a fi re.
• Do not block the vents of the product. Heat may build up in the product and cause a malfunction or fi re.
• Do not stand on or place heavy objects on the product. Also, do not apply excessive force on the buttons, switches, terminals,
etc. This may damage the product and cause injury to the user or other people.
• Store the bag of the product out of the reach of children. It may cause suffocation if placed over the head.
• Be careful not to injure yourself or damage other things on the edges of the product.
• Do not use this product for applications involving human life (such as medical, space, aeronautic, or other applications that
require extreme reliability).
• The product weighs approximately 12 kg (26.46 lbs.). When moving it, lift it in a way that avoids excessive physical stress.
Lifting recklessly or dropping the product may cause physical injury.
• Place the product as close to an outlet as possible to be able to easily unplug the power cord in case of problem.
• If there is dust on the plug, clean it off thoroughly. It may cause an electric shock or a short circuit.
• If metal objects or liquids have fallen into the product, or if there is smoke, a strange odor, or any other abnormality,
immediately unplug the power cord, and then contact a service representative. Do not continue using the product if it is
damaged or not operating properly. This may cause an electrical shock, a short circuit, a fi re, or damage the product.
• Be sure to ground the product. Otherwise, a short circuit may occur, causing fi re or an electric shock.
• Do not plug or unplug the cord with wet hands. This may cause an electric shock.
• Do not open the product, disassemble internal parts, or modify the product. It may cause an electric shock, fi re, or injury, or a
product malfunction. For internal check-ups, adjustments, or repair, please contact a service representative.
Please read this document carefully before use.
Warning