Protecting The Environment; Ec Declaration Of Conformity; Technical Data - Stanley Fatmax FME650 Traducción De Las Instrucciones Originales

Protecting the environment

Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Stanley Fat Max product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
z
Separate collection of used products and packag-
ing allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Stanley Europe provides a facility for the collection and
recycling of Stanley Fat Max products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Stanley Europe office at
the address indicated in this manual. Alternatively, a list of
authorised Stanley Europe repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com

Technical data

Voltage
V
AC
-1
No-load speed min
Oscillating angle Degrees
Power W
Weight
kg
FME650 (Type 1)
230
10,000-22,000
1.4 - 2.8
300
1.53
(Original instructions)
Level of sound pressure according to EN 60745:
Sound pressure (L ) 90 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 101 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
2
Cutting wood (a ) 4.5 m/s , uncertainty (K) 1.5 m/s
h, CW
2
Cutting metal (a ) 10.3 m/s , uncertainty (K) 1.5 m/s
h, CM
2
Sanding (a ) 11.4 m/s , uncertainty (K) 1.5 m/s
h

EC declaration of conformity

MACHINERY DIRECTIVE
%
FME650 Multifunction Oscillating Tool
Stanley Europe declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010,
EN60745-2-4:2009+A11:2011
These products also comply with Directive
2014/30/EU and 2011/65/EU. For more information, please
contact Stanley Europe at the following address or refer to the
back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of Stanley
Europe.
Stanley Europe, Egide Walschaertsstraat14-18,
ENGLISH
2
2
2
R. Laverick
Engineering Director
2800 Mechelen, Belgium
06/12/2016
9