Kemper ProfiMaster Instrucciones De Servicio página 71

3. Now slide one hand under the side of the filter element and then the
other hand. Pull the filter element out of the product using both hands
and place it on a work table.
4. Put the soiled filter into a disposal bag and seal it airtight with a cable
tie. Suitable disposal bags are available from the manufacturer.
5. Lift the new main filter at the bottom and place it on the guiding
profiles of the product with the side bolts. Then, take hold of the front
grip straps with one hand and then the other.
6. Lift the filter at the front end and, at the same time, push it backwards
into the product until it noticeably engages at the end.
7. Now push the pre-filter insertion frames over the newly inserted main
filter.
Please carry out the following steps after changing each filter medium:
1. Close the maintenance door until it noticeably engages.
2. Insert the mains plug into the socket and switch on the product again.
The green indicator lamp on the switch indicates fault-free operation.
3. Dispose of used filter elements in accordance with official regulations.
Please request the relevant waste codes from the local waste disposal
service.
4. Finally, the maintenance area must be cleaned with an industrial
vacuum cleaner for dust classification "H".
NOTE
Observe the information printed on the filter element when changing
the filter.
1502763-02
Fig. 17: Information for filter change
- 71 -
EN