Selecting The Input Signal (Input Button) - Sony SDM-X52 Manual De Instrucciones

1
Grasp the lower middle part of the LCD panel while
holding the display stand, then, tilt the LCD panel
adequately backward.
2
Grasp the lower sides of the LCD panel, then adjust
screen tilt.
3
Grasp the lower sides of the LCD panel, then adjust
screen height.
Selecting the input signal
(INPUT button)
Press the INPUT button.
The input signal change each time you press this button as
follows.
On-screen Input indicator
message lights up
(Appears about
5 seconds on
the upper left
corner.)
INPUT1: DVI-D INPUT1
INPUT1: HD15 INPUT1
(SDM-X72/X82
only)
INPUT2: HD15 INPUT2
Selecting the input signal for the audio input jack
See " (AUDIO SELECT)" on page 16.
Input signal
configuration
DVI-D input
connector (digital
RGB) for INPUT1
HD15 input
connector (analog
RGB) for INPUT1
HD15 input
GB
connector (analog
RGB) for INPUT2
11