Specifications - Sony SDM-X52 Manual De Instrucciones

Specifications

SDM-X52
LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 15.0 inch
Input signal format RGB operating frequency*
Horizontal: 28 – 61 kHz
Vertical: 56 – 75 Hz
Resolution Horizontal: Max.1024 dots
Vertical: Max.768 lines
Input signal levels Analog RGB video signal
SYNC signal
Digital RGB (DVI) signal: TMDS
(Single link)
Power requirements 100 – 240 V, 50 – 60 Hz,
Max. 0.7A
Power consumption Max. 28 W
Operating temperature 5 – 35
Dimensions (width/height/depth)
Display (upright):
Mass Approx. 4.8 kg (10 lb 9 oz) (with
stand)
Approx. 3.5 kg (7 lb 11 oz)
(without stand)
Plug & Play DDC2B
Accessories See page 7.
0.7 Vp-p, 75 Ω, positive
TTL level, 2.2 kΩ,
positive or negative
(Separate horizontal and vertical,
or composite sync)
0.3 Vp-p, 75Ω, negative
(Sync on green)
C
°
Approx. 392 × 358 × 199 mm
× 14 × 7
1 1 7
(15 / / / inches)
2 8 8
(with stand)
Approx. 392 × 299 × 73 mm
× 11 × 2
1 7 7
(15 / / / inches)
2 8 8
(without stand)
SDM-X72/X82
LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 17.0 inch (SDM-X72)
Picture size: 18.1 inch (SDM-X82)
Input signal format RGB operating frequency*
Horizontal: 28 – 92 kHz
Vertical: 56 – 85 Hz
Resolution Horizontal: Max.1280 dots
Vertical: Max.1024 lines
Input signal levels Analog RGB video signal
SYNC signal
Digital RGB (DVI) signal: TMDS
(Single link)
Power requirements 100 – 240 V, 50 – 60 Hz,
Max. 0.9 A (SDM-X72)
Max. 1.2 A (SDM-X82)
Power consumption Max. 40 W (SDM-X72)
Max. 58 W (SDM-X82)
Operating temperature 5 – 35
Dimensions (width/height/depth)
Display (upright):
Mass Approx. 7.1 kg (15 lb 10 oz) (with
stand) (SDM-X72)
Approx. 8.6 kg (18 lb 15 oz) (with
stand) (SDM-X82)
Approx. 5.3 kg (11 lb 11 oz)
(without stand) (SDM-X72)
Approx. 6.5 kg (14 lb 5 oz)
(without stand) (SDM-X82)
Plug & Play DDC2B
Accessories See page 7.
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
0.7 Vp-p, 75 Ω, positive
TTL level, 2.2 kΩ,
positive or negative
(Separate horizontal and vertical,
or composite sync)
0.3 Vp-p, 75Ω, negative
(Sync on green)
C
°
Approx. 438 × 410 × 227 mm
× 16 × 9 inches)
1 1
(17 / /
4 4
(with stand) (SDM-X72)
Approx. 450 × 424 × 241 mm
× 16 × 9
3 3 1
(17 / / / inches)
4 4 2
(with stand) (SDM-X82)
Approx. 438 × 356 × 84 mm
× 14 × 3
1 1 3
(17 / / / inches)
4 8 8
(without stand) (SDM-X72)
Approx. 450 × 368 × 90 mm
3 × 14 1 × 3 5
(17 / / / inches)
4 2 8
(without stand) (SDM-X82)
23
GB