Cleaning And Maintenance - Singercon CON.LMH-9/10/RGB Manual De Instrucciones

EN
An example of the correct installation of the LED head on
the lighting ramp:
3.3. DEVICE USE
Note: the device has a memory function. After setting the
desired lighting effect, press ENTER. After the next start, the
device will turn on with the function previously set.
Menu
DMX
A001- A512 Address code
Address
Channel 12 CH, 43
Channel options
Mode CH
Show SOUND/ Sound - demonstration
Mode AUTO mode
Dimming - standby
Black Out YES / NO
mode
Sound
ON / OFF Audio control switch
State
Sound sensitivity:
Sound
- 1-100
Sense
from smallest to largest
Pan Inverse YES / NO Horizontal rotation
Tilt 1
YES / NO Vertical rotation
Inverse
Tilt 2
YES / NO Vertical rotation
Inverse
Tilt 3
YES / NO Vertical rotation
Inverse
Back Light ON / OFF Backlight
Auto Test Automatic test
Defaults YES / NO Restore factory settings
System
YES System reset
Reset
Channel functions DMX – 12CH
Rotation around the X axis: 0-127
0° - 360°
CH1
128-191 turn right from fast to slow
192-255 turn left from slow to fast
Rotation around the Y1 axis: 0-255
CH2
0° - 100°
Rotation around the Y2 axis: 0-255
CH3
0° - 100°
10
Rotation around the Y3 axis: 0-255
CH4
0° - 100°
Master- dimming: 0-255
CH5
0° - 100°
Strobe: 0-9 no strobe
CH6
10-255 speed from slow to fast
Red - dimming: 0-255
CH7
0° - 100°
Green - dimming: 0-255
CH8
0° - 100°
Blue - dimming: 0-255
CH9
0° - 100°
White - dimming: 0-255
CH10
0° - 100°
Effect
128 - 136 effect 13
0 - 7 no effect
08 - 17 effect 137 - 146 effect 14
18 - 27 effect 2 147 - 156 effect 15
28 - 37 effect 3 157 - 166 effect 16
CH11
38 - 47 effect 4 167 - 176 effect 17
48 - 57 effect 5 177 - 186 effect 18
58 - 67 effect 6 187 - 196 effect 19
68 - 77 effect 7 197 - 206 effect 20
78 - 87 effect 8 207 - 216 effect 21
88 - 97 effect 9 217 - 226 effect 22
98 - 107 effect 10 227 - 236 effect 23
CH11
108 - 117 effect 11 237 - 246 effect 24
118 - 127 effect 12 247 - 255 effect 25
Effect speed 0-255 from fast to slow
CH12 (Auto / sound cannot be controlled
- usually works with CH11)
Channel functions DMX – 43CH
Rotation around the X axis: 0-127
CH1
0° - 360°
Unlimited motor rotation around the X axis:
0 - 127 no effect
CH2
128-191 turn right from fast to slow
192-255 turn left from slow to fast
Rotation around the Y1 axis: 0-255
CH3
0° - 100°
Rotation around the Y2 axis: 0-255
CH4
0° - 100°
Rotation around the Y3 axis: 0-255
CH5
0° - 100°
Master- Dimming: 0-255
CH6
0° - 100°
Strobe: 0-9 no strobe
CH7
10-255 speed from slow to fast
LED1 Red - dimming: 0-255
CH8
0° - 100°
LED1 Green - dimming: 0-255
CH9
0° - 100°
LED1 Blue - dimming: 0-255
CH10
0° - 100°
LED1 White - dimming: 0-255
CH11
0° - 100°
LED2 Red - dimming: 0-255
CH12
0° - 100°
LED2 Green - dimming: 0-255
CH13
0° - 100°
LED2 Blue - dimming: 0-255
CH14
0° - 100°
LED2 White - dimming: 0-255
CH15
0° - 100°
LED3 Red - dimming: 0-255
CH16
0° - 100°
LED3 Green - dimming: 0-255
CH17
0° - 100°
LED3 Blue - dimming: 0-255
CH18
0° - 100°
LED3 White - dimming: 0-255
CH19
0° - 100°
LED4 Red - dimming: 0-255
CH20
0° - 100°
LED4 Green - dimming: 0-255
CH21
0° - 100°
LED4 Blue - dimming: 0-255
CH22
0° - 100°
LED4 White - dimming: 0-255
CH23
0° - 100°
LED5 Red - dimming: 0-255
CH24
0° - 100°
LED5 Green - dimming: 0-255
CH25
0° - 100°
LED5 Blue - dimming: 0-255
CH26
0° - 100°
LED5 White - dimming: 0-255
CH27
0° - 100°
LED6 Red - dimming: 0-255
CH28
0° - 100°
LED6 Green - dimming: 0-255
CH29
0° - 100°
LED6 Blue - dimming: 0-255
CH30
0° - 100°
LED6 White - dimming: 0-255
CH31
0° - 100°
LED7 Red - dimming: 0-255
CH32
0° - 100°
EN
LED7 Green - dimming: 0-255
CH33
0° - 100°
LED7 Blue - dimming: 0-255
CH34
0° - 100°
LED7 White - dimming: 0-255
CH35
0° - 100°
LED8 Red - dimming: 0-255
CH36
0° - 100°
LED8 Green - dimming: 0-255
CH37
0° - 100°
LED8 Blue - dimming: 0-255
CH38
0° - 100°
LED8 White - dimming: 0-255
CH39
0° - 100°
LED9 Red - dimming: 0-255
CH40
0° - 100°
LED9 Green - dimming: 0-255
CH41
0° - 100°
LED9 Blue - dimming: 0-255
CH42
0° - 100°
LED9 White - dimming: 0-255
CH43
0° - 100°

3.4. CLEANING AND MAINTENANCE

a) Always unplug the device before cleaning it.
b) Use only non-corrosive cleaners to clean the surface.
c) Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
d) Do not spray the device with a water jet or submerge
it in water.
e) Do not allow water to get inside the device through
vents in the housing of the device.
f) Clean the vents with a brush and compressed air.
g) The device must be regularly inspected to check its
technical efficiency and spot any damage.
h) Use a soft cloth for cleaning.
i) Do not clean the device with an acidic substance,
agents of medical purposes, thinners, fuel, oils or
other chemical substances because it may damage
the device.
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste systems.
Hand it over to an electric and electrical device recycling
and collection point. Check the symbol on the product,
instruction manual and packaging. The plastics used to
construct the device can be recycled in accordance with
their markings. By choosing to recycle you are making
a significant contribution to the protection of our
environment. Contact local authorities for information on
your local recycling facility.
11