I-Ttl-Bl Flash Mode - Metz mecablitz 64 AF-1 digital Manual De Instrucciones

If the shot was exposed correctly, the correct
exposure indication will illuminate for about
3 seconds (see 4.2).
Setting the mode of operation
• Switch on the flash unit with the
The start screen appear.
MB 64AF-1
Thereafter, the flash unit always switches
digital
on with the mode of operation that was
used last (e.g. M flash mode).
NIK
V 1.2
• Press the displayed mode of operation on
M
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
7.2 m
M-
5,6
m
35
Zoom F
m
P
• Press the
1/1
touch display and select the desired mode
O
MODE
of operation.
• Press on the selected mode of operation
that is highlighted in black. The setting is
TTL
adopted immediately.
A
p
q
• Set a suitable mode of operation on the
camera, e.g. P, S, A etc.
• Tap the shutter release to transfer data
between the flash unit and the camera.
button.
M-
Zoom
sensor buttons on the
M-
Zoom

7.2 i-TTL-BL flash mode (

This digital flash mode is only supported by
cameras if lenses are used that transmit
distance data to the camera (for example,
"D-AF Nikkor lens"). When shooting this data
is taken into consideration in addition in
adjusting the flash exposure.
Setting the mode of operation
• Switch on the flash unit with the
button.
The start screen appears.
Thereafter, the flash unit always switches
M
on with the mode of operation that was
used last (e.g. M flash mode).
7.2 m
• Set a suitable mode of operation on the
camera, e.g. P, S, A etc.
5,6
m
35
F
m
• Tap the shutter release to transfer data
P
between the flash unit and the camera.
1/1
• Press the displayed mode of operation on
O
MODE
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
TTL
• Press the
A
touch display and select
p
q
• Press the
display.
TTL
The setting will take effect immediately.
Some cameras do not support the BL func-
tion in combination with SPOT exposure
0.6- 7.2 m
metering! This flash mode "BL" will then
5,6
m
35 either be automatically cancelled or cannot
F
m
be activated.
EV
TTL BL )
sensor buttons on the
TTL BL
.
TTL BL
sensor button on the touch
k
177