Configuration; Audio/Video Calls From Corridor/Landing - Vimar Eikon 20577 Manual De Instrucciones

CONFIGURATION

A
1
2 +12 S
B
C
TV
Termination BUS line:
A = non-terminated
B = 100 Ohm
C = 50 Ohm
18 - ENGLISH
V.E. V.I.
PC TV VA R
VA
Type of call:
V = audio/video
A = audio only
AUDIO/VIDEO CALLS FROM CORRIDOR/
LANDING
In video entry systems, the corridor/landing button can be
combined with the video components as follows:
- camera 20560-19560-14560 and possibly light 20570-
19570-14570;
- camera 20565-19565-14565 and possibly light 20570-
19570-14570;
A
You are advised to fit mount the call button panel immedi-
ately below where the video components will be installed .
Alternatively, you can use the 3+3 module 09996 square
box to fit the call panel along with the video components .
V
In all cases, the device should be mounted about 160 cm
from floor level .
To connect the cameras, you will need to install the audio/
video switch Art . 69AM that allows video signals to be sent
to internal video phone units when audio/video calls are
received from corridor/landing panels . For details about
programming the audio/video switch, refer to the technical
documentation .