Kit Assembly - Metra 99-7639HG Instrucciones De Instalación

1. Attach the radio brackets to the radio
trim panel using the (4) #8 x 3/8" Phillips
screws provided. (Figure A)
2. Slide the "white" climate control module
removed in dash disassembly into the
lower portion of the bracket/panel
assembly, and then secure with the
factory hardware. (Figure B)
3. Secure the pocket to the bracket/panel
assembly using the
(4) #8 x 3/8" Phillips screws provided.
(Figure C)
4. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
6

KIT ASSEMBLY

(Figure A)
(Figure B)
5. Slide the radio into the completed
assembly, and then secure it to the
assembly using the screws supplied with
the radio. (Figure D)
6. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Test the radio for proper
operation.
7. Reassemble the dash in reverse order of
disassembly.
(Figure C)
(Figure D)
|
386.257.1187 MetraOnline.com