Programming Optiflex; Treatment Value Details - Chattannoga OptiFlex SHOULDER CPM Modo De Empleo

5.2 Programming OptiFlex

Different programming levels are
provided to program the OptiFlex
You change between levels by pressing
the MENU key repeatedly.
The display always indicates the
currently selected level.
The following treatment values,
settings and information can be
entered/viewed on the programming
unit (1):
LEVEL 1:
- Abduction
- Adduction
- Internal rotation
- External rotation
LEVEL 2:
- Pause
- Therapy timer
- Speed
- New patient
LEVEL 3:
- Reverse on load - motor A
- Reverse on load - motor B
- Motor A ON/OFF
- Motor B ON/OFF
LEVEL 4:
- Transport setting
- Synchronized/
non-synchronized mode
- Total therapy time
- Service menu
® S
Note!
• While you adjust the values, the
carriage will move to the set range.
® S.
This allows you to easily and
quickly determine the ROM where
the patient does not experience
pain.
• The angle entered last for the
respective direction of motion will
be saved in each case.

5.3 Treatment value details

• To access the programming level you
need, press the MENU key repeat-
edly.
• The treatment parameters are selected
with the different parameter keys.
• To change the treatment values, press
MENU
the + / – keys.
• To enable/disable a function, press
the respective parameter key again.
• To save the entered values, press the
STOP key.
LEVEL 1:
MENU
■ Abduction
Maximum value:
■ Adduction
MENU
20
Maximum value:
175 degrees
30 degrees