Publicidad
Idiomas disponibles
Idiomas disponibles
Installing the Dual Flush Converter
If your unit has a button
Blue Push Release
Color-Coded Blue Rod
Quick Flush
Full Flush
Nut
Control Box
Button
Refer to this illustration to familiarize
yourself with terms for parts of the
Dual Flush Converter
*
This device is not intended to be used as a retrofit device for
1.28 gpf water closets. Performance may vary since product
was not tested on all models of water closets.
9
A
B
A. Turn off water (optional).
B. Disconnect and remove flapper
Flush toilet.
and handle.
*
If your unit has a handle
Green Push Release
Color-Coded Green Rod
Quick Flush
Full Flush
Nut
Control Box
Black
Blue Float
Quick Flush
Rubber
Adjustment
Ring
Cam
Green Slide
Full Flush
Adjustment
Upper Housing
Zip Tie
Base
Blue Silicone
Dome Gasket
A
B
10
A. Push in Blue or Green Release.
C. Twist Upper Housing to unlock.
B. Separate Handle or Button.
D. Pull up from Base to separate.
Overflow
Tube
11
Slide Base down overflow tube, seating Blue Silicone Gasket into flush
valve. Unit is designed to install vertically with both angled and straight
flush valve openings.
Black Rubber
Ring
A
B
Zip Tie
13
A. Slide Black Rubber Ring onto
C. Attach Upper Housing to Base.
overflow tube. Maintain slight
D. Twist to lock in place.
downward pressure to Rubber Ring.
B. Then pull Zip Tie tight.
Handle/Button Assembly
D
Control Box
Upper
Housing
Control Cable
Upper
Housing
C
Base
15
Fill Valve
Match the color-coded hole to the corresponding Handle/Button connection
pieces, attach white Control Box to Handle/Button. Audible click assures that
Clip has secured Control Box to Handle/Button and unit will no longer pull
apart without pushing the Green or Blue Push Release.
CONTROL BOX AND CONTROL CABLE MUST NOT TOUCH FILL VALVE OR
INTERFERE WITH FILL VALVE'S OPERATION.
Fill Gap with Cam
Blue Silicone
Gasket
Flush Valve
12
If gap appears around overflow tube, estimate width of space and use
with thick, medium or thin section of Cam, as needed to fill gap.
Handle/Button
C
D
14
For units with Handle, position and hand tighten Handle in a standard
operating position.
For units with Button, hand tighten Button with smaller Quick Flush
Button positioned above the Full Flush Button.
Refill Tube Port
Clip to top
of overfill tube
16
Install Refill Tube of fill valve. Attach Clip to overflow tube.Trim tubing to
size to prevent kinking and install tubing ontothe Mini-Valve Refill Tube Port.
Thin
Cam
Medium
Thick
Handle
Position
Quick Flush
Button
Full Flush
Button
Refill Tube
Publicidad
