Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
17
NOTE: Refill Tube must be positioned above overflow tube.
DO NOT INSERT REFILL TUBING DOWN OVERFLOW PIPE.
This improper installation violates plumbing code and couldresult in a leak.
Float Lock
19
Turn on water and when water is clear, disengage Float Lock to fill tank.
This willprevent debris from plugging up Valve.
Blue Float
Green Slide
21
METAL/COPPER
METAL
VINYL/BRAIDED
FLARED TUBING
FLANGED TUBING
Cone
Washer
18
RECOMMENDED
DO NOT OVERTIGHTEN. We recommend replacing an old, rigid metal
water supply. We recommend replacing an old, rigid metal water supply
line with a flexible, braided supply line.
DO NOT USE PLUMBER'S PUTTY TO SEAL FITTINGS.
20
A Thumb Screw is provided to fine-tune adjustments to float. Proper
water level should be indicated inside tank or 1/2" to 1" (13 - 25 mm)
below overflow tube.
Adjust Blue Float. Top of Float must be at least 1/2" (13 mm)
below water level.
In most cases water level can be raised by adjusting the fill valve.
Quick Flush = Blue Float
Up = less water Down = more water
Full Flush = Green Slide
Up = less water Down = more water
CONNECTOR
The following steps illustrate adjustments to the Mini-Valve
Begin with the
Mini-Valve in the
OPEN position.
If the water
continues to
ripple after
reaching the
Thumb
pencil mark...
Screw
...turn
the Mini-Valve
counter-clockwise.
Continue adjusting the
Mini-Valve or Blue Float
until the water reaches the
pencil mark at the same time
as the tank finishes filling.
Adjustment is for Quick Flush. Rippling will occur on Full Flush.
Water-Saving Tips
and Quick Flush Float to maximize savings.
®
Open
Your Fill Valve and
Dual Flush Converter
are now calibrated to
save you thousands of
gallons (litres) of water
year after year.
IMPORTANT NOTE
Flush the Quick Flush
button/handle and watch
as the bowl refills.
If the water is lower
than the pencil mark
after the tank fills...
... adjust the Quick
Flush Blue Float
downwards, or open
Mini-Valve.
Publicidad
