Saurium HSD1G-75 Manual De Instrucciones página 66

Maintenance
Clean the outside of the machine.
Check that the engine switch works correctly.
Check that the blades are undamaged and
show no signs of cracking or other damage.
Replace the blades if necessary.
Check that the blade guard is not damaged or
distorted. Replace the blade guard if it is bent or
damaged.
Clean the air filter. Replace if necessary.
Check that nuts and screws are tight.
Check that there are no fuel leaks from the
engine, tank or fuel lines.
Check the starter and starter cord.
Clean the outside of the spark plug. Remove it
and check the electrode gap. Adjust the gap to
0.6-0.7 mm or replace the spark plug. Check
that the spark plug is fitted with a spark plug
cap.
Clean the machine's cooling system.
Clean the outside of the carburetor and the
space around it.
Check the flange, cap and nut are assembled
correctly and tightened
Clean the fuel tank.
Check all cables and connections.
Check the clutch, clutch springs and the clutch
drum for wear. Replace if necessary by an
authorized service workshop.
Replace the spark plug. Check that the spark
plug is fitted with a spark plug cap.
To reduce the fire hazard, clean dirt, leaves and
surplus lubricant, etc from the muffler and
engine.
Check the blade
X
X
X
X
X
X
X
65
X
X
X
X
X
X
X
X
X
X
X