Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL INFORMATION
FOR THE INSTALLER
Installation, adjustments of controls and
maintenance must only be carried out by a
qualified engineer.
The appliance must be correctly installed in
conformity with current law and the
manufacturer's instructions.
Incorrect installation may cause damage to
persons, animals or property for which the
Manufacturer shall not be considered responsible.
During the life of the system, the automatic
safety or regulating devices on the appliance
may only be modified by the manufacturer or by
his duly authorized dealer.
4) INSTALLING THE HOT PLATE
Check that the appliance is in a good condition after
having removed the outer packaging and internal
wrappings from around the various loose parts. In
case of doubt, do not use the appliance and contact
qualified personnel.
Never
leave
the
(cardboard, bags, polystyrene foam, nails, etc.)
within children's reach since they could
become potential sources of danger.
INSTALLATION
packaging
materials
FIG. 9
The measurements of the opening made in the top of
the modular cabinet and into which the hot plate will
be installed are indicated in either fig. 9. Always
comply with the measurements given for the hole into
which
the
(see fig. 9 and 10).
The appliance belongs to class 3 and is
therefore subject to all the provisions
established by the provisions governing such
appliances.
IMPORTANT!
A perfect installation, adjustment or
transformation of the cook top to use
other gases requires a QUALIFIED
INSTALLER: a failure to follow this rule
will void the warranty.
COMPLY WITH THE DIMENSIONS (mm)
A
2F - 2E
280
26
appliance
will
B
C
D
480
60
60
FIG. 10
be
recessed
E
100 min.
Publicidad
Tabla de contenido
