Cleaning; Maintenance - TOUGHBUILT TB-H2-LL-100-L2 Instrucciones De Funcionamiento

Before and after each use, thoroughly inspect the tool for damage.
IMPORTANT! DO NOT use a damaged tool.
After completion of each work cycle, or at the end of the day, slide the Pendulum
3
Switch to its LOCKED position.
If the tool is soiled, wipe with a damp cloth. DO NOT USE CHEMICALS. Laser reflectors
should be wiped with a lint-free cloth only. DO NOT USE PAPER TOWEL.
DO NOT allow the tool to get wet. Damage to internal circuits may result.
•
Tool is not waterproof.
• DO NOT leave tool in direct sunlight or expose it to high temperatures. The
housing and some internal parts are polymeric materials and may
become deformed at high temperatures.
DO NOT store the tool in a cold environment. Moisture may form on interior parts
•
when warming up. This moisture could fog up laser windows and/or cause
corrosion of internal circuit boards.
NOTE: When working in dusty locations, some dirt may collect on the laser
window. Remove moisture or dirt with a soft, dry cloth.
DO NOT use aggressive cleaning agents or solvents.
•
IMPORTANT! To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustments (other than those listed in this manual) should be
performed by authorized service centers or qualified service personnel, always using
identical replacement parts.
Repairs should be carried out by an authorized after-sales service center for
tools. Customer Service Number (US): 1 (800) 228-4695
ToughBuilt
®
ACCESSORIES:
IMPORTANT! To reduce the risk of injury, only ToughBuilt
used with this product. ToughBuilt
your local dealer at extra cost.

CLEANING

6.

MAINTENANCE

7.
offers a large selection of accessories available at
®
accessories should be
®
15