Introduction; Explanation Of Symbols - LIVARNO home 1033-S Instrucciones De Uso Y De Seguridad

LED star/ LED tree
z Introduction
Congratulations on the purchase of
your new product. You have chosen
a high-quality product. Please read
these operating instructions thoroughly and
carefully. These instructions are an essential
part of the product and contain important
information on first-time use and handling.
Always observe all safety instructions. If you
have any questions or are unsure how to
operate the product, please contact your
retailer or service centre. Please keep this
manual in a safe place and pass it on to
third parties where necessary.
z Explanation of symbols
Read the operating
instructions!
Issue date of
instruction manual
(month/year)
Date of manufacture
(month/year)
Direct current
Alternating current
Risk of fatal injury and
accidents for infants and
children!
Observe warning notices and
safety instructions!
Warning! Risk of electric
shock!
Electrical devices that carry
this symbol are rated as
Protection Class II.
Mains plug
This symbol indicates that the
product operates with safety
extra-low voltage (SELV/PELV,
Lamp
protection class III).
42
GB/IE/NI/CY/MT
Protected against solid foreign
objects with a diameter of
≥ 1.0 mm, splash-proof
Light colour
With timer function
For indoor and outdoor use
Designed to be splash-
waterproof (IP44)
Network operation
Cable includes connector
The "GS" symbol stands for
safety-tested. Products that are
Mains plug
marked with this symbol meet
the requirements of the
German Product Safety Act
(Produktsicherheitsgesetz).
Dispose of packaging and
product in an environmentally
friendly manner!
Packaging made of FSC
certified wood mix
MIX
Packaging
With the CE label, the
manufacturer confirms that this
product complies with the
applicable European
directives.
The device contains a safety
isolating transformer.
This symbol stands for an
independent operating device,
for use outside lamps without
additional cover.
This symbol describes the
polarity of the connector's
output voltage.