DISP MODE
What to do
7.
Set the number
of steps
8.
Confirm the
number of steps
9.
Aspirate
liquid
10.
Dispense
liquid
11.
Initiate blow-out
12.
End dispensing
How to do it
Press to set the number of
steps.
'Steps' continues to blink.
Press the ENTER key.
The display now shows the
number of steps that has
been set.
Press the pipetting key once
to aspirate the liquid.
Each time the pipetting
key is pressed one dispens-
ing step is performed. The
arrow in the display points
downwards (discharge). The
display shows the number of
dispensing steps left.
Press the ENTER key after
the last dispensing step.
The display shows 'blo' for
blow-out. Press the pipet-
ting key once to initiate the
blow-out process (see also
p. 19).
After the residual liquid is
discharged (blow-out), the
display moves back to the
start position.
Keys to press
Display readout
+
–
1x
1x
1x
1x
21
ErgoOne E · User Manual ·